1、打开包装盒，取出主机、电机插线和自粘电极；
Open the packaging box and take out the main machine, electrode wire and self-adhesive electrodes;
2、电极插线的一端插入主机，另一端插入两片自粘电极；
One port of the electrode wire is inserted into the main machine, and the other pulse port is inserted into two self-adhesive electrodes;
3、揭开自粘电极的保护膜，把两片自粘电极分开，贴到患处；
Uncover the protective film of the self-adhesive electrode, separate the two self-adhesive electrodes and stick them to the affected parts;
4、开机或关机——按主机电源开关持续3秒钟；
Power on or off -- press the host power switch for 3 seconds;
5、根据需要选择“针灸”、“按摩”、“锤击”、“刮痧”等治疗方法；
Select "acupuncture", "massage", "hammer" and "scraping" as needed;
6、脉冲强度选“+”加强，选“-”减弱；
Select "+" to enhance pulse intensity and "-" to decrease it;
7、停止治疗前先关机再取下自粘电极，并贴回保护膜上；
Power off before stopping treatment, then remove the self-adhesive electrodes and paste them back onto the protective film;
8、如果自粘电极不粘，可用自来水冲洗，晾干再用。
If the self-adhesive electrodes are not sticky,wash with tap water and let dry before use.
